enLanguage

Products

บ้าน / Fully Automatic Band Saw Details
Fully Automatic Band Saw Machine

Fully Automatic Band Saw Machine

This GZ-4240 fully automatic band saw machine is an equipment for cutting metal materials with bi-metal band saw blades, featuring compact construction, fast cutting speed, high precision, narrow kerf, less noise, easy operation etc.. It is an energy-saving product to replace reciprocating sawing machine and is widely used for cutting metal materials in various industries such as construction, automobile, transportation, bridge-building, ship-building etc. Fully-automatic Band Saw Machine with bundle cutting
Send Inquiry
This GZ-4240 fully automatic band saw machine is an equipment for cutting metal materials with bi-metal band saw blades, featuring compact construction, fast cutting speed, high precision, narrow kerf, less noise, easy operation etc.. It is an energy-saving product to replace reciprocating sawing machine and is widely used for cutting metal materials in various industries such as construction, automobile, transportation, bridge-building, ship-building etc.
✔ Double Column Type
✔ Fully-automatic
✔ Hydraulic Downfeed

MODEL GZ-4240
Cutting Capacity 0° ● Ø400 mm Ø 15 3/4“
0° ▅ 400 mm Wx400 mm H 15 3/4“x15 3/4“
Drive Capacity Main Motor 4.0 kW
Hydraulic Motor 0.75 kW
Coolant Pump 0.06 kW
Blade Speed 19, 30, 50, 65, 90 m/min 62, 98, 164, 213, 295 ft/m
Blade Size 34x1.1x4650 mm
Workpiece Clamping Hydraulic Vise
Blade Tensioning Manual
Main Drive Wormwheel Drive
Multiple Feed 500 mmx9 times
Table Height
Weight
Machine Size (LxWxH) 2265x2200x1550 mm 89 1/6"x86 3/5"x61"

1. Power Blade Cleaning Brush
2. LED Work Light
3. Automatic Feed Roller
4. NC Control
5. Security Switch
6. One Piece of Bi-metal Saw Blade
7. One Set of Tools with Tool Box
8. Instruction Manual

1. 2M Separate Material Roller Table
2. Variable Vise Pressure for Tube Cutting
3. Automatic Chip Conveyor
4. Hydraulic Blade Tension
5. Inverter

The GZ4240 double column automatic feed bandsaw's hydraulic system can automatically clamp, cut, and feed bundles. The heavy steel frame on this 3 phase automatic bandsaw maintains accuracy.The automatic feed will help reduce scrap, labor costs, and errors, while the simple design and good quality components will ensure easy service and reduced down-time.The carbide blade guides and bearing are to promote longevity.

Features

  • P.L.C. control for all electric and hydraulic function.
  • Cuts up to 400mm round and 400 x 400 mm rectangle at 90°.
  • Hydraulically controlled dual vise clamping system.
  • Roller bearing with carbide blade guide system.Automatic work height control by fast approach bar sensor.Preset cut counter with shut off. Out of stock shut off.Multiple indexing (9 times). Nesting fixture for bundle cutting. Power driven blade cleaning brush. Idler wheel motion detector with blade stalling and breakage shut off. Flushing hose for machine cleaning.
  • Desired number of parts controlled by electronic part counter.Carbide blade guides and rollers,Roller conveyor,Automatic blade breakage control,Hydraulic blade tension,Coolant system
  • 0.75 kW motor runs the low-pressure hydraulic system.
  • Cutting speed range is 19/30/50/65/90 m/min.
  • Accepts a standard 41x1.3x4650 mm blade for speed and precision.
  • Available in 380-volt 3-phase models . Also customized voltage for different customer.
  • touchscreen programmer is easy to use, so you can get to work right away.
  • Digital encoders helpful to feed the material to repeatable cuts.
  • Hydraulic large-capacity bundling system clamps the material tight to ensure a consistent cut across all of the pieces.
  • Programmer can run in manual or automatic mode.
  • Power blade cleaning brush and coolant system keep the saw clean and make blades last longer.
  • In case a blade breaks, automatic blade shut-off protects your safety.
  • Bright halogen work light lets you clearly see what the machine’s doing.
  • Covered by a 1-year parts warranty.

(0/10)

clearall